Legal
1.1 In these Terms: RISPHER means [RISPHER B.V.], registered in [city], the Netherlands. Customer means the legal entity or government organisation that requests a quotation from or enters into an Agreement with RISPHER. Agreement means any agreement between RISPHER and Customer for the supply of Products or Services, including Evaluation Sets. Products means radio modules, ground control stations, accessories and the Firmware and Software supplied with them. Firmware and Software means all firmware, FPGA configurations, software, APIs, user interfaces and documentation supplied by RISPHER. Services means engineering, integration support, training, repair and other services. Specifications means the technical specifications that RISPHER has confirmed in writing for the Product version supplied. In writing includes email.
1.2 These Terms apply to all quotations, order confirmations and Agreements of RISPHER, and to all Products and Services supplied by RISPHER.
1.3 RISPHER supplies exclusively to businesses and government organisations. RISPHER does not sell to consumers.
1.4 The general or purchasing terms of Customer do not apply and are expressly rejected, unless RISPHER has accepted them in writing.
1.5 Deviations from these Terms are only valid if agreed in writing. If any provision is void or annulled, the other provisions remain in force, and the parties will replace the provision with a valid one that comes as close as possible to its purpose.
1.6 In case of conflict, the following order applies: the order confirmation or signed quotation, then any specific written agreement (such as an NDA or evaluation agreement), then these Terms.
2.1 Quotations are without obligation and valid for the period stated in the quotation, or for [30] days if no period is stated.
2.2 An Agreement is formed when RISPHER confirms an order in writing, or when RISPHER starts performing it.
2.3 Quotations are based on the information Customer provides, including platform, use case, frequency band, quantities, destination country and end user. Customer guarantees that this information is correct and complete. If it is not, RISPHER may adjust prices and delivery times.
2.4 RISPHER may refuse an order, or make it subject to conditions, such as export, end-user or sanctions screening, the issue of licences, a credit check or advance payment.
2.5 Information on the website, in product sheets, brochures and presentations is general information and not an offer. Only Specifications confirmed in writing are binding.
2.6 Changes to or cancellation of an order after formation require RISPHER's written consent. Costs already incurred, including materials, engineering and custom work, will be charged. Customised Products cannot be cancelled.
3.1 Prices are in euros and exclude VAT, other taxes and duties, export and import costs, shipping and insurance, unless stated otherwise.
3.2 If cost factors such as components, tariffs or exchange rates rise significantly after the Agreement is formed, RISPHER may adjust the price accordingly. If the increase exceeds [10]%, Customer may terminate the Agreement for the affected part within 14 days after notification.
3.3 Volume prices and discounts apply only to the quantities, forecasts and periods agreed in writing. If Customer does not purchase the agreed quantities, RISPHER may invoice the price difference.
3.4 Invoices must be paid within [30] days of the invoice date, without deduction or set-off. RISPHER may require advance payment or security, for example for first orders, engineering work or exports.
3.5 If Customer does not pay on time, Customer is in default without notice. Customer then owes the statutory commercial interest (Article 6:119a Dutch Civil Code) and the reasonable judicial and extrajudicial collection costs.
3.6 While an invoice is overdue, RISPHER may suspend deliveries, Services, support and updates.
3.7 Objections to an invoice must be made in writing within 14 days of the invoice date and do not suspend the payment obligation.
4.1 Unless agreed otherwise, delivery is [FCA RISPHER's premises, Incoterms 2020]. Risk passes to Customer in accordance with the agreed Incoterm.
4.2 Delivery times are estimates and not strict deadlines. Delivery times start only once RISPHER has received any advance payment, all required information and any required export licences and end-user statements. If a delivery time is exceeded, Customer must give RISPHER written notice with a reasonable period of at least 30 days to deliver.
4.3 RISPHER may deliver in parts and invoice each part separately.
4.4 Customer inspects the Products on delivery. Visible damage, shortfalls or wrong items must be reported in writing within [8] days of delivery, with photos. After that period the delivery is considered accepted. Hidden defects are covered by Article 9.
4.5 If Customer does not take delivery, the Products are stored at Customer's cost and risk.
4.6 Products remain the property of RISPHER until Customer has paid all amounts owed under the Agreement in full. Until then, Customer may use and integrate the Products in the normal course of its business, but may not pledge them or grant any other right to third parties. Customer stores the Products recognisably as property of RISPHER and insures them. RISPHER may take back Products that have not been paid for. If the Products are delivered to another country where a broader retention of title is possible, that broader retention applies.
5.1 An Evaluation Set is a set of Products supplied for testing on Customer's own platform. Evaluation Sets are supplied against payment of the price stated in the quotation, with the engineering support and evaluation period stated there (normally [60–90] days).
5.2 Evaluation Sets are intended for testing and qualification only. They may not be used operationally, resold or deployed, unless RISPHER has agreed to this in writing.
5.3 Before the evaluation starts, the parties agree in writing on the test scope and acceptance criteria, such as link budget, range, throughput, latency, link-loss and recovery behaviour, movement profile, environment and interference conditions. The parties prepare a joint test report.
5.4 Part of the evaluation price is credited only if the quotation says so, and only against a signed production order above the agreed minimum volume, placed within the period stated in the quotation.
5.5 Each party keeps ownership of its own data. RISPHER may use the technical findings from an evaluation to improve its products. RISPHER only uses evaluation results as a reference, in anonymised form, with Customer's prior written permission.
5.6 Results achieved under Customer's test conditions do not guarantee the same performance in other configurations, environments or applications.
5.7 If the quotation states that an Evaluation Set is provided on loan, Customer returns it complete and in good condition within 14 days after the evaluation period, unless Customer purchases it.
6.1 Customisation includes, for example, a customer-branded interface, housing, interface ports, colour scheme, button and joystick layout, white-label versions, software adapters and band profiles. Customisation is only supplied if agreed in writing, and subject to the minimum order quantity (MOQ) stated in the quotation.
6.2 Non-recurring engineering (NRE), qualification, tooling, certification and testing are quoted and invoiced separately, and are payable as agreed, for example per milestone. Amounts paid for work already performed are non-refundable, also if no production order follows.
6.3 Customer must purchase at least the agreed MOQ. For framework agreements and blanket orders, Customer provides a rolling forecast. The first [3] months of each forecast are binding. RISPHER reserves production capacity and materials on the basis of the forecast and may invoice materials and quantities that are not called off.
6.4 Customer is responsible for the accuracy of the designs, specifications, interface control documents, logos and other materials it supplies. Customer guarantees that it is entitled to have these materials used, and indemnifies RISPHER against third-party claims arising from them.
6.5 After design freeze, changes are only made through a written change request. RISPHER informs Customer of the effect on price, delivery time and qualification before carrying out the change.
6.6 Unless agreed otherwise in writing, all intellectual property rights in customised designs created by RISPHER remain with RISPHER, without prejudice to Customer's own trademarks and logos. Exclusivity only applies if agreed in writing.
7.1 Products conform at delivery to the Specifications confirmed in writing for the version supplied. Performance figures such as range, throughput, latency and behaviour under interference are measured under the test conditions stated in the documentation, such as antenna setup, line of sight and environment. They are not guaranteed for Customer's specific configuration, unless agreed in writing as acceptance criteria.
7.2 Ruggedness ratings such as MIL-STD-810H and IP65 apply to the configuration tested as stated in the test documentation. Modifications, integration or accessories not supplied by RISPHER may affect these ratings.
7.3 RISPHER may change Products, provided this does not materially affect form, fit or function. Material changes are announced in accordance with Article 15.
7.4 The Products transmit in the 2.0–2.5 GHz range. Use of these frequencies may require a licence, authorisation or coordination, which differs per country and application. Customer, or its end user, is responsible for obtaining all spectrum authorisations, and for configuring and using the Products only within the permitted frequencies, output power and antenna combinations. Customer will not circumvent region or frequency restrictions in the Firmware.
7.5 RISPHER supplies the declarations and test documentation stated in the product documentation. Customer is responsible for the compliance, certification and approval of its own platform and integrated system, and for its use, including aviation, road traffic and defence regulations.
8.1 Products, Firmware, Software and technical data may be subject to export control and sanctions laws of the European Union, the Netherlands and other countries, including Regulation (EU) 2021/821 (dual-use items), legislation on military and strategic goods, and EU sanctions regulations. Both parties will comply with these laws.
8.2 Customer provides RISPHER, on request, with complete and truthful information on the end user, end use and final destination of the Products, and signs any end-user statements required. RISPHER may refuse, suspend or cancel an order without liability if a required licence is refused, delayed or revoked, or if RISPHER has reasonable grounds to suspect a breach of export control or sanctions laws.
8.3 Customer will not sell, export, re-export, transfer or make available Products, Firmware, Software or technical data, directly or indirectly: (a) in breach of applicable export control or sanctions laws; (b) to any person or entity subject to sanctions of the European Union or the United Nations, or owned or controlled by such a person; or (c) for any use connected with weapons of mass destruction, without all required licences.
8.4 Customer shall not sell, export or re-export, directly or indirectly, to the Russian Federation or Belarus, or for use in the Russian Federation or Belarus, any goods supplied under or in connection with an Agreement that fall under the scope of Article 12g of Council Regulation (EU) No 833/2014 or Article 8g of Council Regulation (EC) No 765/2006.
8.5 Customer will impose the obligation of Article 8.4 on any party to which it resells the Products, and will maintain an adequate monitoring mechanism to detect conduct by third parties further down the supply chain that would frustrate the purpose of Article 8.4. Customer informs RISPHER immediately of any problems in applying Article 8.4, including relevant activities by third parties.
8.6 Any breach of Articles 8.3 to 8.5 is a material breach. RISPHER may then terminate the Agreement with immediate effect and suspend all deliveries and support, without liability. Customer also owes a penalty of [the total price of the Agreement], without prejudice to RISPHER's right to full compensation.
8.7 Delays caused by licensing procedures are not attributable to RISPHER. Customer is responsible for import requirements in the country of destination.
9.1 RISPHER warrants for 12 months from delivery that the Products are free from defects in material and workmanship and conform to the Specifications. Each Product is supplied with a factory functional test, a serial number and a test record.
9.2 If a Product is defective within the warranty period, RISPHER will, at its option, repair it, replace it or credit the price paid for it. Repaired or replaced Products are covered for the remainder of the original warranty period, or for [3] months if that is longer. Subject to Article 11, this is Customer's only remedy for defects.
9.3 The warranty does not cover defects caused by:
9.4 Products may only be returned after RISPHER has issued an RMA number. Customer returns the Product in suitable packaging, with the serial number and a description of the fault. Shipping to RISPHER is at Customer's cost. For warranty repairs, RISPHER pays the return shipping within the EU. If no defect is found, or the defect is not covered by the warranty, RISPHER may charge inspection and return costs.
9.5 Before returning a Product, Customer removes or resets encryption keys, credentials and sensitive configuration data. RISPHER may reset returned Products to factory settings.
9.6 Repairs outside the warranty are carried out at RISPHER's current rates, after Customer's approval of a quotation.
9.7 For third-party products, such as third-party radio options, antennas or batteries, RISPHER passes on only the warranty of the manufacturer, to the extent possible.
9.8 To the extent permitted by law, RISPHER gives no warranties other than those in this Article, including any warranty of fitness for a particular purpose.
10.1 The Products are subsystems designed for integration into UAV, UGV and ground systems by qualified professionals. Customer is solely responsible for the design, integration, testing, qualification, certification and safe operation of its platform and integrated system.
10.2 No radio link can be guaranteed to be uninterrupted. Radio links can be degraded or lost because of distance, terrain, obstacles, weather, interference, jamming, antenna placement, platform movement, configuration and other factors outside RISPHER's control. Customer will design its platform and operations so that loss or degradation of video, control or telemetry does not lead to unsafe situations, for example through link-loss and failsafe behaviour, independent safety functions and operating procedures.
10.3 The Products are not designed as the sole means of control in applications where failure could result in death, personal injury or serious damage, unless RISPHER has agreed in writing to a specific safety qualification for that application.
10.4 Customer assesses whether the Products are suitable for its intended use. Advice and integration support from RISPHER are given to the best of RISPHER's ability, but do not transfer design responsibility to RISPHER.
10.5 Customer ensures that its operators are trained, and that the Products are installed and used in accordance with the documentation and applicable laws.
10.6 If Customer resells the Products or integrates them into its own products, Customer passes on the relevant documentation, safety information and restrictions of these Terms, including Articles 7, 8 and 10, to its customers and end users.
11.1 RISPHER is only liable for direct damage resulting from an attributable failure to perform the Agreement, or from a tort. Direct damage means only: (a) reasonable costs to establish the cause and extent of the damage; (b) reasonable costs to make RISPHER's defective performance conform to the Agreement; and (c) reasonable costs to prevent or limit damage, insofar as these relate to direct damage.
11.2 RISPHER's total liability per event, or series of related events, is limited to the price (excluding VAT) of the Products or Services under the Agreement that gave rise to the liability. For agreements with a duration of more than one year, this is limited to the amount invoiced in the 12 months before the event. In all cases, RISPHER's total liability is limited to [€ amount] and to the amount paid out by RISPHER's liability insurer in that case, plus the applicable deductible.
11.3 RISPHER is not liable for indirect or consequential damage, including:
11.4 The limitations in this Article do not apply if the damage results from intent or deliberate recklessness of RISPHER's management. They also do not limit any liability that cannot be limited or excluded under mandatory law, such as liability towards injured persons under product liability law.
11.5 A right to compensation only arises if Customer has given RISPHER written notice of default, with a reasonable period to remedy the failure, and RISPHER still fails after that period. Customer must report damage in writing within [30] days after discovery. All claims against RISPHER expire 12 months after the event that caused the damage.
11.6 The limitations in this Article also apply to RISPHER's employees, subcontractors and suppliers, who may invoke them directly.
12.1 Customer indemnifies RISPHER against all third-party claims, including those of end users, Customer's customers and authorities, and against related costs, fines and damage, arising from:
12.2 RISPHER informs Customer promptly of any such claim. Customer will provide all reasonable cooperation and bear the reasonable costs of defence, including legal costs.
13.1 All intellectual property rights in the Products, hardware designs, FPGA configurations, Firmware, Software, APIs, user interfaces, documentation, test methods and know-how remain with RISPHER or its licensors. No rights are transferred, unless explicitly agreed in writing.
13.2 RISPHER grants Customer a non-exclusive, non-transferable licence to use the Firmware and Software solely to operate, integrate and maintain the Products. The licence passes with the Product to a subsequent buyer, provided Article 8 is complied with. Customer may sublicense this right to its end users solely for the use of the integrated Products.
13.3 Customer will not, except as permitted by mandatory law: reverse engineer, decompile or extract the Firmware, Software or FPGA configurations; modify the Firmware; or circumvent security measures, region locks or frequency restrictions.
13.4 For customer-branded and white-label versions, Customer grants RISPHER a non-exclusive licence to use Customer's trademarks, logos and designs solely to perform the Agreement. These remain Customer's property.
13.5 The Software may contain open-source components. Their own licence terms apply to those components.
13.6 If a third party claims that a Product infringes its intellectual property rights, RISPHER may, at its option: obtain the right for Customer to continue using it, modify the Product so it no longer infringes, or take it back and refund the price less a reasonable depreciation. This is RISPHER's only obligation in that case. It does not apply if the claim arises from a modification, a combination with products not supplied by RISPHER, or designs or specifications supplied by Customer.
13.7 RISPHER may freely use suggestions and feedback from Customer to improve its products.
14.1 The Products include security features, such as AES-256 encryption, as described in the documentation. No system is completely secure. RISPHER does not guarantee that the Products are free from vulnerabilities or immune to interception, interference, jamming or attacks.
14.2 Customer is responsible for key management, secure configuration, credentials, physical security, installing updates and the security of its own integrated system and networks.
14.3 Security vulnerabilities can be reported to [security@rispher.com]. RISPHER assesses reported vulnerabilities, informs affected customers where relevant, and makes reasonable efforts to provide mitigations or updates during the support period.
14.4 Detailed security documentation is provided on request, under a non-disclosure agreement where necessary. Integration of customer-specific cryptography requires a separate written agreement and may be subject to export restrictions.
15.1 RISPHER may provide Firmware updates for bug fixes, security fixes and improvements during the warranty period, and after that under a support agreement. Customer is responsible for installing updates in good time.
15.2 RISPHER keeps records of serial numbers, hardware and Firmware versions, and publishes release notes with each update.
15.3 Where reasonably possible, RISPHER announces changes that affect form, fit, function or qualification at least [90] days in advance, in writing.
15.4 RISPHER announces the end-of-life of a Product at least [12] months in advance and offers a last-time-buy opportunity. RISPHER will make reasonable efforts to provide repairs and spare parts for [5] years after the last delivery, or for the period agreed in the quotation.
15.5 Support beyond the warranty, such as extended support, training, field service and service levels, is provided under a separate agreement.
16.1 Both parties keep confidential all non-public information they receive from the other party, including technical and security documentation, prices, test results and platform data, and use it only to perform the Agreement. This does not apply to information that is public, was already known, was developed independently, or must be disclosed by law or by an authority. In that last case, the disclosing party informs the other party in advance where permitted.
16.2 This obligation applies during the Agreement and for [5] years after it ends. For trade secrets and security information it applies for as long as the information remains confidential.
16.3 A separate non-disclosure agreement between the parties prevails over this Article.
16.4 Classified information will only be exchanged under separate written security arrangements agreed in advance.
17.1 RISPHER is not liable for a failure to perform caused by circumstances beyond its reasonable control. These include war and armed conflict, terrorism, sabotage, cyberattacks, epidemics, government measures, the refusal or delay of export licences, sanctions and embargoes, shortages or allocation of components, failure of suppliers, transport disruptions, strikes, fire, power failures and extreme weather.
17.2 During force majeure, the obligations of RISPHER are suspended. If force majeure lasts longer than 90 days, either party may terminate the Agreement in writing for the affected part, without any obligation to pay compensation. Customer pays for performance already delivered.
18.1 RISPHER may suspend performance, or terminate the Agreement in whole or in part with immediate effect and without court intervention, if:
18.2 In those cases, all amounts owed by Customer become immediately due. RISPHER is not liable for any damage resulting from the suspension or termination.
18.3 Customer may only terminate the Agreement because of an attributable failure by RISPHER after written notice of default with a reasonable period of at least 30 days to remedy the failure.
18.4 Termination does not affect amounts already invoiced for performance delivered. Provisions that by their nature continue after termination remain in force, including Articles 8, 11, 12, 13, 16 and 21.
19.1 Both parties comply with applicable anti-bribery and anti-corruption laws, and will not offer, pay or accept any improper payment or advantage in connection with the Agreement. Customer ensures that its agents and distributors do the same.
19.2 Customer declares that it, its owners and its managers are not subject to EU or UN sanctions, and informs RISPHER immediately if this changes.
20.1 RISPHER processes the personal data of Customer's contact persons in accordance with its Privacy Statement at [rispher.com/privacy-statement].
20.2 RISPHER has no access to the video, control or telemetry data that Customer transmits with the Products. If Customer shares logs or other data with RISPHER for support, RISPHER uses them only for that support. If RISPHER processes personal data on behalf of Customer, the parties will conclude a data processing agreement.
21.1 Dutch law governs these Terms and all Agreements. The United Nations Convention on Contracts for the International Sale of Goods (CISG) does not apply.
21.2 All disputes will be submitted exclusively to the competent court in [the district of RISPHER's registered office]. RISPHER may also bring a claim before the competent court of Customer's place of business.
21.3 If these Terms are translated, the English version prevails.
22.1 Customer may not transfer rights or obligations under an Agreement without RISPHER's written consent. RISPHER may engage subcontractors and may transfer an Agreement to an affiliated company or a successor of its business.
22.2 If a party does not enforce a provision, this does not mean that it waives its right to do so later.
22.3 RISPHER may amend these Terms. Amended Terms apply to Agreements formed after Customer has been informed of the amendment.
22.4 These Terms are available at [rispher.com/terms-and-conditions] and will be sent free of charge on request.
These terms apply to the use of rispher.com, operated by [RISPHER B.V.], [address], Chamber of Commerce no. [number].
1. Information. The information on this website, including product descriptions, specifications, images and documents, is for general information only. It is not an offer and may change without notice. Product images may differ from the Products supplied. Only Specifications confirmed in writing in a quotation or order confirmation are binding.
2. No liability. RISPHER makes every effort to keep this website accurate and available, but does not guarantee that the information is complete, correct or up to date, or that the website is free from errors or interruptions. RISPHER is not liable for damage resulting from the use of this website or of information on it, to the extent permitted by law.
3. Links. This website may contain links to third-party websites. RISPHER is not responsible for their content or their privacy practices.
4. Intellectual property. All content on this website, including texts, images, logos, designs and documents, is owned by RISPHER or its licensors. It may not be copied, published or used for commercial purposes without RISPHER's written permission.
5. Prohibited use. You may not test, probe or attack the security of this website, scrape its content systematically, or upload malicious code. Security vulnerabilities can be reported to [security@rispher.com].
6. Downloads and export control. Technical documents on this website may be subject to export control laws. Certain technical and security information is only shared on request, after screening and under a non-disclosure agreement.
7. Requests. Sending a request through this website does not create an agreement. RISPHER may decline requests, for example on the basis of export control or sanctions screening.
8. Privacy and cookies. RISPHER processes personal data in accordance with its Privacy Statement and Cookie Policy.
9. Applicable law. Dutch law applies to these terms of use and to the use of this website.